Brochure
Printing is similar to book binding; the
publicity hinge has both the integrity of the cover and the integrity of the
content, which is one of its own, which is loved by businesses and consumers.
Compared with the single page, the display content of the publicity folding
page is richer, and compared with the publicity album, the folding page is more
environmentally friendly. The advantages and characteristics of folding benefit
from its folding mode. For this, biyin market network summarizes the common
folding modes of folding for your reference.
Leaflet folding is a common type in brochure
printing, but compared with leaflet pages, there are many kinds of
folding methods and more precautions. In order to let you have a more
comprehensive, intuitive and specific understanding of folding methods, biyin
market network summarizes and describes several common folding methods and
displays them intuitively with drawings.
If the thickness of the folded paper exceeds 0.16mm or the
paper after polishing, the folding operation can be done only after pressing
the line, so as to reduce the breakage of the paper. However, it can not be
guaranteed that the paper will not break after pressing the line. The paper
with a thickness of more than 0.25mm can only be folded in half by pressing the
line, and cannot be folded more times. For sizes below 16K, complex folding
cannot be made.
1�?Fold in half, that is, fold in half according to the
center line from the middle of the fold.
2�?30% off. Divide the length of the fold into three parts
on average and fold it inwards along the axis of symmetry, which is the inner
triple fold, also known as the wrap center fold; Similarly, folding outward
along the axis of symmetry is the outer three fold, also known as Z-shaped fold
or parallel fold.
3�?Double fold (four fold) brochure
printing, also known as double fold. Just repeat the single fold in
half procedure twice.
4�?Organ folding, a folding method similar to a fan, is
named for its similarity to an organ, also known as parallel folding. Each fold
is parallel to each other, and the folding direction determined by the two
adjacent folds is exactly the opposite. It is usually less than six pages. The
common organ folds are 30%, 4%, 5%, 6%, 7, etc. there are also 12 folds.
However, the more folds, the more losses. We must pay attention to this.
5�?The door closing fold is generally a double door fold,
which is symmetrical. Fold the paper in half from the left and right sides to
the center, and the creases are parallel to each other, just like two closed
doors.
6�?A scroll fold, consisting of 4 or more pages, which are
folded inward successively, so the width of the page must be gradually
increased to facilitate folding.
7�?Cross folding is to fold left and right first, and then
vertically. After opening, you can see the cross line, so it is called cross
folding. Cross folding can also be divided into cross 2-fold, cross 3-fold and
cross 4-fold.